Formal methods for industrial critical systems, preface to the special section

[EN] This special issue contains improved versions of selected papers from the workshops on Formal Methods for Industrial Critical Systems (FMICS) held in Eindhoven, The Netherlands, in November 2009 and in Antwerp, Belgium, in September 2010. These were, respectively, the 14th and 15th of a series of international workshops organized by an open working group supported by ERCIM (European Research Consortium for Informatics and Mathematics) that promotes research in all aspects of formal methods (see details in http://www.inrialpes.fr/vasy/fmics/). The FMICS workshops that have produced this special issue considered papers describing original, previously unpublished research and not simultaneously submitted for publication elsewhere, and dealing with the following themes: Design, specification, code generation and testing based on formal methods. Methods, techniques and tools to support automated analysis, certification, debugging, learning, optimization and transformation of complex, distributed, real-time and embedded systems. Verification and validation methods that address shortcomings of existing methods with respect to their industrial applicability (e.g., scalability and usability issues). Tools for the development of formal design descriptions. Case studies and experience reports on industrial applications of formal methods, focusing on lessons learned or new research directions. Impact and costs of the adoption of formal methods. Application of formal methods in standardization and industrial forums. The selected papers are the result of several evaluation steps. In response to the call for papers, FMICS 2009 received 24 papers and FMICS 2010 received 33 papers, with 10 and 14 accepted, respectively, which were published by Springer- Verlag in the series Lecture Notes in Computer Science (volumes 5825 [1] and 6371 [2]). Each paper was reviewed by at least three anonymous referees which provided full written evaluations. After the workshops, the authors of 10 papers were invited to submit extended journal versions to this special issue. These papers passed two review phases, and finally 7 were accepted to be included in the journal.his work has been partially supported by the EU (FEDER) and the Spanish MEC TIN2010-21062-C02-02 project, MICINN INNCORPORA-PTQ program, and by Generalitat Valenciana, ref. PROMETEO2011/052.Alpuente Frasnedo, M.; Joubert ., C.; Kowalewski, S.; Roveri, M. (2013). Formal methods for industrial critical systems, preface to the special section. Science of Computer Programming. 78(7):775-777. doi:10.1016/j.scico.2012.05.005S77577778

The regional-scale surface mass balance of Pine Island Glacier, West Antarctica, over the period 2005--2014, derived from airborne radar soundings and neutron probe measurements

We derive recent surface mass balance (SMB) estimates from airborne radar observations along the iSTAR traverse (2013, 2014) at Pine Island Glacier (PIG), West Antarctica. Ground-based neutron probe measurements provide information of snow and firn density with depth at 22 locations and were used to date internal annual reflection layers. The 2005 layer was traced for a total distance of 2367 km to determine annual mean SMB for the period 2005–2014. Using complementary SMB estimates from two regional climate models, RACMO2.3p2 and MAR, and a geostatistical kriging scheme, we determine a regional-scale SMB distribution with similar main characteristics to that determined for the period 1985–2009 in previous studies. Local departures exist for the northern PIG slopes, where the orographic precipitation shadow effect appears to be more pronounced in our observations, and the southward interior, where the SMB gradient is more pronounced in previous studies. We derive total mass inputs of 79.9 +/- 19.2 and 82.1 +/- 19.2 Gt yr-1 to the PIG basin based on complementary ASIRAS–RACMO and ASIRAS–MAR SMB estimates, respectively. These are not significantly different to the value of 78.3 +/- 6.8 Gt yr-1 for the period 1985–2009. Thus, there is no evidence of a secular trend at decadal scales in total mass input to the PIG basin. We note, however, that our estimated uncertainty is more than twice the uncertainty for the 1985–2009 estimate on total mass input. Our error analysis indicates that uncertainty estimates on total mass input are highly sensitive to the selected krige methodology and assumptions made on the interpolation error, which we identify as the main cause for the increased uncertainty range compared to the 1985–2009 estimates

Effects of Orthogonal Rotating Electric Fields on Electrospinning Process

Electrospinning is a nanotechnology process whereby an external electric field is used to accelerate and stretch a charged polymer jet, so as to produce fibers with nanoscale diameters. In quest of a further reduction in the cross section of electrified jets hence of a better control on the morphology of the resulting electrospun fibers, we explore the effects of an external rotating electric field orthogonal to the jet direction. Through extensive particle simulations, it is shown that by a proper tuning of the electric field amplitude and frequency, a reduction of up to a $30 \%$ in the aforementioned radius can be obtained, thereby opening new perspectives in the design of future ultra-thin electrospun fibres. Applications can be envisaged in the fields of nanophotonic components as well as for designing new and improved filtration materials.Comment: 22 pages, 8 figure

Directional Degradation of Spectralon Diffuser Under Ionizing Radiation for Calibration of Space-Based Sensors

Assessment of the effect of Vacuum Ultra Violet (VUV) irradiation on the Bidirectional Reflectance Distribution Function (BRDF) of Spectralon is presented in this paper. The sample was a 99% white Spectralon calibration standard irradiated with VUV source positioned at 60o off the irradiation direction for a total of 20 hours. The BRDF before and after VUV irradiation was measured and compared at number of wavelengths in the UV, VIS and IR. Non-isotropic directional degradation of Spectralon diffuser under ionizing radiation was detected at different BRDF measurement geometries primarily at UV spectral range. The 8o directional/hemispherical reflectance of the same sample was also measured and compared from 200nm to 2500nm. Index Terms BRDF, Reflectance, Multiangular, Spectralon, Remote Sensin

Dean flow-coupled inertial focusing in curved channels

Passive particle focusing based on inertial microfluidics was recently introduced as a high-throughput alternative to active focusing methods that require an external force field to manipulate particles. In inertial microfluidics, dominant inertial forces cause particles to move across streamlines and occupy equilibrium positions along the faces of walls in flows through straight micro channels. In this study, we systematically analyzed the addition of secondary Dean forces by introducing curvature and show how randomly distributed particles entering a simple u-shaped curved channel are focused to a fixed lateral position exiting the curvature. We found the lateral particle focusing position to be fixed and largely independent of radius of curvature and whether particles entering the curvature are pre-focused (at equilibrium) or randomly distributed. Unlike focusing in straight channels, where focusing typically is limited to channel cross-sections in the range of particle size to create single focusing point, we report here particle focusing in a large cross-section area (channel aspect ratio 1: 10). Furthermore, we describe a simple u-shaped curved channel, with single inlet and four outlets, for filtration applications. We demonstrate continuous focusing and filtration of 10 mu m particles (with > 90% filtration efficiency) from a suspension mixture at throughputs several orders of magnitude higher than flow through straight channels (volume flow rate of 4.25ml/min). Finally, as an example of high throughput cell processing application, white blood cells were continuously processed with a filtration efficiency of 78% with maintained high viability. We expect the study will aid in the fundamental understanding of flow through curved channels and open the door for the development of a whole set of bio-analytical applications